What Size Motorcycle Cover Will Fit a Honda Valkyrie with Hard Saddlebags?

So I am thinking of a possible answer to my own question:Build my own journal note entry app linked to a wiki.Zim Wiki uses a file based system for wiki. Maybe I could write app to export/sync entries in its files. Or WikkaWikki uses a MySQL (which is probably what I would use for journal entries anyway) so perhaps use same DB for Wiki and journal, with Journal app "doing right thing" to enter/sync Entries in wiki.Does this seem like a good approach?Or maybe I can customize a wiki with existing plugins - "All" I really need is good journaling / date feature, time tracking, checklist, and tags. Perhaps there already are plugins for this?Please comment if you have feedback on this idea.1. Circular tag wiki excerptsTag excerpts should at least try and give a concise definition as to the subject, and provided any usage guidance if necessary.Therefore, you need to make sure to address a set of key points:In general, excerpts should provide at least some guidance, even if it may appear to be ridiculously basic. Therefore, interpretation of the rejection reason is critical:That's like saying, [abs]: For questions about [abs] filaments. That should probably be rejected. This is better: [abs]: For questions about [abs] filaments - filaments that are used with blah blah printers, and are not toxic for use.Or even better: [abs]: For questions about [abs] filaments - filaments that are used with blah blah printers, and are not toxic for use. Not to be confused with [pla] filaments. Do not use this tag if your question does not concern this filament specifically. Obviously, I have no idea if abs is even a thing. Anyways, I hope this helps :)2. Why is this answer a community wiki?Apparently the answer under scrutiny was made CW because it drew on an answer from another Stack site, and the answerer wanted to share it without being associated with it for good or for ill.But community wiki is not a tool for reputation denial (or for dodging the repercussions of questionable-quality answers) and practically speaking I see no difference between quoting a different Stack and quoting a blog or a book. We would never expect someone to eschew rep for quoting a blog or a book. The answerer went to the trouble of tracking down the information and sharing it; why should not rep gains should reflect that?The moderation team is under no obligation to revert the CW in this case, nor are they obligated to leave it be, but I would lean toward reverting it myself, for reasons which follow.We've talked about posting answers from other sites, and it's pretty clear this is not cheese.Community wiki used to be massively overused. Changes to the editing system rendered its original purpose largely moot, and there's now a lot of confusion about CW's role in the Stack mechanics. These days there are three basic reasons to use CW:I do not see this particular answer needing CW to make it "easier to edit and maintain by a wider group of users," so I do not see any reason for it to be a community wiki. Community wiki is a tool with a specific set of uses, and CW rollbacks are left to mod discretion. One of the responsibilities of our moderators is to help the community use the right tools for the job at hand.As for the answer itself--it's not very good by lit.se standards, because it was written for a different site with different priorities. And the question itself is under a tag whose implementation is still being debated, so quality there is... in flux, I suppose we could say. We need to bring in our own expertise and tailor the answer to meet the expectations of our own Stack.3. Need to Change Edit Approval Limits for Tag Wiki EditorsI just upped it from 3 to 5. Hopefully this alleviates the issue a bit. If we still notice a pattern of users being blocked we can look at adjusting further4. Difference between Wiki Library and Document LibraryYes there is difference, Below might be helpful to understand.Document library can contains documents, it can be any document like office documetnts doc,xls,ppt, js, css, jpg, png etc...any file extension you can think of. Main purpose of document library is to store documents. wiki library is a kind of document library which contains wiki pages, Wiki pages are html pages with rich text editing capabilities so that users can create pages using Rich Text Editor without knowing html in detail. So when wiki library template is selected it comes with some default columns created based on content type, this columns are useful to create wiki page. Making changes and edits in a wiki page is incredibly easy. Just click on the edit button (at the top of the page) and immediately the page appears as an editor's version of the page. You can then make edits straight away and simply hit save. The page will instantly be up and running with your changes in place.

sharepoint. com/ContentTypeId:0x010100C568DB52D9D0A14D9B2FDCC96666E9F2007948130EC3DB064584E219954237AF39004C1F8B46085B4D22B1CDC3DE08CFFB9C*'&rowlimit=101. What types of questions or answers should be made community wiki?Questions for which useful answers will involve lists of items, such as criteria or resources, because wiki mode will then allow these to be compiled into one answer rather than scattered over many.2. atomic-code-golf tag wiki is misleadingHere is another proposal to rip apart:3. SP WIKI: How to modify the left menu?If your site do not have customization layout or component, I guess it is built using Enterprise Wiki site template.The left menu is called Current Navigation. Click the right top gear icon > site settings > Navigation. You should see the Current Navigation section as below:You can change the settings here4. Adding wikis categories on the fly when creating new Wiki articleIf the Allow Fill-in option is set to yes, terms the user types are added to the root of the wiki categories term set.Although this is not ideal, an administrator can then move the terms to a more appropriate location5. What is Wiki-leaks? I hear alot about it?Wiki-Leaks is a web site that releases secret or sensitive documents from western governments and western businesses. It's goal is to expose the truth. Funny though, they never seem interested in exposing the truths of other groups.6. Approving tag wiki edits - reject based on a typo?Personally, if it's reasonably substantial, I would approve it, then go and edit it myself to fix the typo. If someone has written some good content, it should be used, and they should get credit for it.If, on the other hand, it's just a few words, and one or more are misspelled, well, I would probably reject it; not worth the trouble to go and fix.7. Initial portion of some tag wiki excerpts is getting cut offThis is by design, the tag wiki excerpt code tries to avoid repetition in the beginning of the excerpt. See this answer by Jeff Atwood for some more details. The regex is supposed to be the following, though I do not know if this is still current:This causes a significant amount of collateral damage, as you have noticed.8. new user made answer community wiki? [duplicate]If a question is community wiki, any following posts to that question will be community wiki. Note that the user's post was subject to the First Post review queue, and was deemed No Action Needed. If it were not in the First Post queue (being, if it were not the user's first post), it would (if I am correct here) be added to the Late Answers queue for users under a certain amount of reputation. Thus, even though it's community wiki, the answer is still moderated9. Is it fair to ask that a question be moved to the community wiki after it is closed?Generally, things that should be moved to community wiki will have a torrent of comments saying "This should be CW". For questions which are 'subjective and argumentative' there are some of them which might actually be good candidates for community wiki if they were refactored to edit out all the possible flamebait in them. However, the way the community usually manages this is that if a user edits out all the problems, then it may get re-opened, or they can try to reformat it so much as to be unrecognizable and try again. In YOUR case, your question was not closed as "S & A", it was closed as "NPR" because it is in no way programming related. Similar to "How much is on your desk?" or "What is your Programmer Ringtone?" these are questions which you can ask to programmers, but they really do not have to do with programming. Even if your question was initially CW, then it would likely have been closed. EDITSince you asked a question in your title that I did not explicitly answer. YES it is FAIR to ask that they re-open it so you can move it to CW, but generally, the answer will be no, because moderators often-times (not always) would give you a chance or a warning to move it to CW first, before they vote to close. In your case, the CW-ness was not the contested part.

Separator (oil production) - WikipediaAgitation, heat, special baffling, coalescing packs, and filtering materials can assist in the removal of nonsolution gas that otherwise may be retained in the oil because of the viscosity and surface tension of the oil. Gas can be removed from the top of the drum by virtue of being gas. Oil and water are separated by a baffle at the end of the separator, which is set at a height close to the oil-water contact, allowing oil to spill over onto the other side, while trapping water on the near side. The two fluids can then be piped out of the separator from their respective sides of the baffle. The produced water is then either injected back into the oil reservoir, disposed of, or treated. The bulk level (gas-liquid interface) and the oil water interface are determined using instrumentation fixed to the vessel. Valves on the oil and water outlets are controlled to ensure the interfaces are kept at their optimum levels for separation to occur. The separator will only achieve bulk separation. The smaller droplets of water will not settle by gravity and will remain in the oil stream. Normally the oil from the separator is routed to a coalescer to further reduce the water content.— — — — — —If we completely stop oil production today how will we make these products?No one with half a brain is saying we get rid of oil entirely. It still fuels 90% of our energy. But is it really to hard to ask that we slap some regulations on the oil industry? Its out of control. BP makes 30 billion dollars a year and yet it cant invest a few million in proper safety regulations and protocols and inspections? And most of those products are plastic products. Lots of plastic is made from petroleum. But there are hundreds, if not thousands of replacements to make plastic. You can make plastic from corn, chicken feathers, hemp, etc etc. Edit: Actually, that entire list is quite misleading. Aside from the chemical products (ex. dish-washing detergent) all of those products can be replaced with petroleum-free plastics.— — — — — —Has anyone heard of the abiotic theory of oil?There are two competing theories concerning the origins of petroleum. One theory, peak oil, claims that oil is an organic 'fossil fuel'—deposited in finite quantities near the planet's surface. The other theory, abiotic, claims that oil is continuously generated by natural processes in the Earth's magma. There is currently a debate amongst the peak oil theorists and the abiotic oil theorists. Much to my chagrin, I have not been able to ascertain the relative implications of their arguments—with substantial certainty. The primary considerations are: What are the relative percentages of peak v.s. abiotic oil? Is the supply of oil renewable? How does technology, politics, and economics play into the exploration and the supply of oil? -------- The peak oil theory says that oil production will reach a peak—or already has—and then, as production declines while demand increases, our oil-dependent global industrial system will break down The peak oil theory argues that the abiotic generation rates would have to be so small as to be politically insignificant. The consensus is that there might be abiotic oil, but that it's not going to delay the crash. Oil generation is, in part, a geological process. It proceeds at an extremely slow rate—from our human perspective. The oil we are currently using up will not be replaced within our lifetime—or within many lifetimes. That is why hydrocarbons are called non-renewable resources. -------- There is some speculation that oil is abiotic in origin—generally asserting that oil is formed from magma instead of an organic origin. The theory of abiogenic petroleum origin holds that natural petroleum was formed from deep carbon deposits, perhaps dating to the formation of the Earth. The ubiquity of hydrocarbons in the solar system is taken as evidence that there may be a great deal more petroleum on Earth than commonly thought, and that petroleum may originate from carbon-bearing fluids which migrate upward from the mantle. -------- This does not mean that all oil is abiotic. This does not mean current oil wells will start filling up again. There are vast stores of oil somewhere deep underground—perhaps remnants of our planet's alloted share of the solar system's methane. Nevertheless, oil deposits that are very deep under the ground are virtually useless. The technology to drill down to these wells—much less the technology to find them—is not available (or all that economically feasable).

Separator (oil production) - WikipediaThe physical and chemical characteristics of the oil and its conditions of pressure and temperature determine the amount of gas it will contain in solution. The rate at which the gas is liberated from a given oil is a function of change in pressure and temperature. The volume of gas that an oil and gas separator will remove from crude oil is dependent on (1) physical and chemical characteristics of the crude, (2) operating pressure, (3) operating temperature, (4) rate of throughput, (5) size and configuration of the separator, and (6) other factors.— — — — — —Is this Krill oil product really good? And is 2 pills (the serving size) too much?I take them everyday. They are far better than fish oil. Buy the ones you can afford and take them like it says on the bottle,, not how strangers on yahoo tell you— — — — — —Why doesnu2019t Vietnam allow a military base for the USA in Cam Ranh? Isnu2019t it much easier for them to deter China agressiveness in SCS, protect its fishermen, and maybe have more successful oil production?Because Vietnam deterence of China is only a part of a bigger whole: we dont want to pick side.Modern history had told that whenever Vietnam picked a side, we got into a mess. We picked the communist side in exchange for help to kick out the France, and the US ruin the countries with war. We picked the USSR during the Communist bloc schism, and we got into the Cambodian mess as well as tension with China for around 2 decades.So, Vietnam dont want to pick a side. And as far as near modern history go, and I would argue even as far as modern geopolitic go, giving a military base for any nation mean picking a side— — — — — —Who said, U.S. oil production grew more in 2012 than in any year in the history of the domestic industry?The Contentious Otter— — — — — —People always say that I'm sweating or that I'm greasy looking. How can I cut down on the oil production?Washing your hair too often can make it even more greasy, so only wash it every other day— — — — — —Liberals are saying that oil production is up do they know Liquefied natural gas is counted as oil?can you actually source your source?— — — — — —Since dems seem to hate big oil, why would they want to hurt the small businesses in oil production?They just do not understand the issue. Like the "big profits" that the "big oil" companies make - - they can not comprehend that drilling costs, which skyrocketed at an even faster rate than crude prices, are largely capitalized, meaning that for companies maintaining the same drilling levels, free cash flow is much lower than net income, and that if free cash flow is higher than net income it means that the company is reducing its drilling levels and thus its future earnings, which is why "big oil" companies trade at such low multiples. Seriously, you are expecting a Democrat to understand GAAP and basic investment theory - - if they understood finance, they would not be Democrats.— — — — — —pimples problem :how to get a clear skin ?I would use Proactiv along with their Daily Oil Control-its a lotion that evens out oil production and it worked great for me. Also get a good lotion as Proactiv is very drying.— — — — — —Why does gasoline cost much less in the United States compared to what it costs in Germany?The US is now self sufficient in oil production and have huge reserves that you do not find the same in Europe. I do not think I've ever seen an oil derrick pumping oil there. That makes oil and gas prices higher for Europe since they are living on imported oil and natural gas.— — — — — —As protest to the war lets all stop buying and using oil products. Any up for it?Good idea That would free up the oil need for Bush to give to North Korea. Yesterday he promised Korea that he (America) would give North Korea all the oil they needed to make electricity. Go big Red Go— — — — — —Heavy oil productionHeavy oil production is a developing technology for extracting heavy oil in industrial quantities. Estimated reserves of heavy oil are over 6 trillion barrels, three times that of conventional oil and gas. Factors that affect the difficulty of putting reserves into production include permeability, porosity, depth and pressure. The density and viscosity of the oil is the determining factor. Density and viscosity determine the method of extraction. Oil viscosity varies with temperature and determines the ease of extraction; temperature can be controlled so that oil can be moved without employing additional techniques. Density is more important for refiners since it represents the yield after distillation. However, no relationship links the two. Oil reservoirs exist at varying depths and temperatures. Although viscosity varies significantly with temperature, density is the standard in oilfield classification. Crude oil density is commonly expressed in degrees of American Petroleum Institute (API) gravity which are associated with specific gravity. The lower the API gravity, the denser the oil. The API gravity of liquid crude oil ranges from 4º for tar rich in bitumen to condensates that have an API gravity of 70º. Heavy oils are classified between ultra-heavy oils and light oils. They have API gravities ranging between 10º and 20º. Crude oil generated by petroleum source rocks has an API gravity of between 30º and 40º. Crude oil becomes heavy after considerable degradation, after entrapment and during devolatilization. Degradation occurs through chemical and biological processes when oil reservoirs become contaminated by bacteria through subsurface water. The bacteria then break down some crude oil components into heavy components, making it more viscous. Water carries away low molecular weight hydrocarbons in solution form since they are more soluble. When crude oil is enclosed by a poor quality seal, lighter molecules separate and escape, leaving behind the heavier components through devolatilization. Heavy oils are commonly found in geologically young formations since they are shallow and have less efficient seals, providing the conditions for heavy oil formation.

listingslistings is a package that provides advanced features for typesetting computer codeThe listings package extends LaTeX's verbatim features. A variety of syntax highlighting options are available. For the unrelated concept of list structures, use the lists tag or the tag corresponding to a specific list structure.1. What is the biggest piece of 'misinformation' you have heard about hockey on TV/Sportscast/Wiki, etc?i was told that the pens are gonna trade Evgeni Malkin to get Ryan Malone back...complete rubbish2. Can we please have better tag wiki excerpts?If you write are or is in the first 40 characters of an excerpt, the part before, and including, are or is is removed when showing the excerpt. That is the reason why most excerpt starts with "questions about," "topics related to," or something similar.This answer reports the regular expressions used to truncate the excerpt; in short, you cannot start an excerpt with, for example, "this tag," "this tag is," "this tag is used to," the [foo] tag," "the tag [foo]," "blah blah is," or "blah blah are" (replace "blah blah" with any phrase that uses less than 37 characters).3. Should community wiki SO questions be moved to Meta?I do not think so. The community wiki questions on SO, while perhaps not as straightforward as non-CW questions, are still (however vaguely) programming-related or they would get closed just as well. Meta is not for programming-related questions, but for discussion about SO. Thus they belong on SO, not meta.There may be some questions however that do belong here, but certainly not all.4. What can we do to make Community Wiki better?I think a large part of the confusion with Community Wiki is that there is technical functionality (no rep, lowered rep requirement for editing) attached to something that's merely meant to indicate to others that the question or answer is not definitive and could use the help of the community to make it better.As I mentioned in my comment on Aarobot's answer, pointing out that it allows people to edit your question is a misnomer: community members can do that whether Community Wiki is enabled or not; a feature that the FAQ explicitly points out. And we've already seen how people abuse the no-rep part of it, so that should not be pointed out, either. Instead, I think the wording should indicate the intent, not the functionality, behind enabling Community Wiki. That is,This answer is not definitive and needs the help of other experts to make it better5. Conventions for tag wiki excerpts, especially on jurisdiction tagsJurisdiction tag excerpts should be treated just like any other tag excerpt: provide the information needed for someone to decide if it's the correct tag or not: what jurisdiction it covers, and which other jurisdictions they might be interested in. For example, a united-states excerpt:United States federal jurisdiction. For state jurisdiction, use the appropriate state tag instead.6. Character limit for wiki answersI would not even be worried about it. Something like this is going to happen in the near future:While being somewhat facetious, there is a serious problem with that post. If the post is that large, just how much use can it actually have? Who is going to go through and read all of those books? At this point, you might as well just search for "programming" on Amazon and you will come up with pretty much the same thing.How does one even decide which book on the most highly upvoted answer should be read first? It's impossible to tell and your feature request will just make that monstrosity even more unwieldy. I can not see the reason for a mechanism that takes something that is unmanageable and exacerbates the very thing that makes it unmanageable7. Change font color of headers in Zim WikiAs Raphal Dor kindly pointed out on github, style.conf should be placed in C:UsersusrAppDataRoamingzimconfigzim. Changes will apply after closing and reopening zim. Note that this worked for me, while for Raphal the file had to be placed at C:UsersusrAppDataRoamingzimconfigzimprofilesNotes8. Is there any way to view a list of all recent tag wiki edits on a specific site?Part of the 10k tools is the suggested edits page. (SO)It shows all pending, approved, and rejected edits, and (when applicable), who approved or rejected them. There are also tabs for "controversial", "anonymous", and "improved" edits.

Skateboard wheels come in different sizes. The size specification indicates the diameter of the wheels and is given in millimeters (mm). In general, skateboard wheels have a diameter between 50 mm and 59 mm. Anything bigger is not suitable for your skateboard and is intended for cruisers or longboards.* * Our recommendation is meant for street skateboarding purposes. Here it is common to use wheels with a diameter up to 59 mm. Of course, you can also use larger wheels like the 60mm Bones SPF wheels for a skateboard setup. However, these are more likely to be used for specific setups (e.g., cruiser & filmer boards) or for vert skateboarding. Smaller wheels accelerate faster and are lighter and more compact. However, their top speed is lower than larger wheels. Moreover, with bigger wheels, you will be on the safe side when riding on rough ground since they wo not be stopped by each and every little stone that crosses your path. Larger wheels are devoted to reaching higher speeds and are more durable. So, to break it all down for you: For street skateboarding use small wheels between 50 - 53mm, for small ramps and mini-ramps use mid sized wheels from 53 - 56 mm, for vert skateboarding, use larger wheels up to 59 mm. For beginners and anyone who's undecided, we recommend all-around wheels with a diameter of 53-56mm. This size range is currently the most popular with skaters. When buying skateboard wheels, you should check to make sure your wheel size fits with your setup. What is crucial here is your truck selection. When your trucks and wheels are not right for each other, you will end up with some nasty wheel bites. As you might have guessed, bigger wheels also require higher trucks. Of course, with big wheels and high trucks your entire setup will be a bit higher. There are two things you should keep in mind with such a setup: 1. During the pop-off, the tail has to go a long distance until it hits the ground. Consequently, the angle of your board will be steeper and Ollies (theoretically) will be higher. If you've got enough power and long legs this should not be a problem, but small skaters and beginners could face some hard times here. 2. Since the board is higher above the ground than with small wheels and low trucks, you will have to bend your knees more while pushing. This can become quite exhausting. Should your wheel size not fit your trucks, you can use shock or riser pads to increase the distance between your deck and wheels.i'm alot obsessed with skateboarders.?um im a skater haha i got the brown shaggy hair tight pants black shirt spiked metal belt dc shoes and blue eyes just go up to the hottest skater and kinda hang out with him and date him to get over a obsession with someone you like you gotta date em hit me up on myspace Antifashion skateboards?there is a reason they call it antifashion get a plan b or girl board bee-otchOpinion on my skateboard setup? Im a beginner to skateboarding...?Your set up sounds great, especially for a beginner, Mob grip is a good choice, and Plan B deck's have great pop. Nice choice. Ryan.Walmart Skateboards????buy a real skateboard because if you buy a walmart one and try to upgrade the trucks wont fit right like the holes for the screws on the trucks wont line up with the holes on the deckwhich are the best skateboards?buy an enjoi or element or plan b they may be expensive but they have good qualitywhat are the lightest skateboarding trucks?Light trucks? Well, the "lightest" trucks I've had were Silver and Independant. But, I do not suggest a "too light" truck because they might break easily. Just so you know, lighter trucks do not make you jump higher, it's all in your mind.Skateboarding help?Go to a skating shop, do not go to like shopping centers that sell skateboards because they are cr@p, and do not get element boards they snap easily. Get a Baker board, or Flip, or birdhouse, get a board withing $50 to $150, because your just learning, and do not need an expensive board

Any time somebody is linking to their personal website an excessive amount or in irrelevant situations, that is spam. This is also bad for two other reasons:Additionally, this user is violating the Stack Exchange Terms of Service. Although all content on Stack Exchange is licensed under a free Creative Commons license, attribution is required. This author has not given any attribution to the original question/answer on Stack Overflow1. How do I wiki-edit the blog?The blog is currently run through Wordpress, and does not operate on the same principles as the QA sites. If you make me or one of the site moderators aware of the typos, we will correct them2. How exactly do I use custom templates in Zim wiki?To use more Wiki templates (while you make new notes), you add them to the Wiki folder.Depending on where you installed zim: C:Program Files (x86)Zim Desktop Wikidatatemplateswiki3. Should wiki locks prevent voting?You ask In my personal opinion, no.This is an oddity that has confused me for a while. Take, for example, some most excellent posts on Seasoned Advice:These are important canonical posts there and if you note, have more people who have favorited them than have upvoted the question, likely because that's their only option and the (unlocked) answer votes also outnumber the question votes. There's even a note on the second one encouraging people to favorite it. I am sure that other sites have similar examples but these are the ones I am most familiar with.So... why is it like this? Let's talk about it a bit...There's an iconic scene in Five Easy Pieces where Jack Nicholson tries to order a side of toast but the restaurant he and his friends are in does not offer side orders of toast, only English muffins or coffee rolls and the waitress wo not budge because she does not make the rules. .. and it's not because they do not have wheat bread and the ability to toast it, it's just not on the menu. So he tries to get around it by ordering a chicken salad sandwich made with wheat toast without mayonnaise, butter, or lettuce... or chicken. It gets them kicked out of the restaurant. Locks are kinda like that. We have four different lock reasons on our menu but they are really just three of the same menu item with a different name and description (post notice) and the fourth menu item (historical significance lock) is the first three plus cheese. We have all of the individual ingredients but can only turn them on in a group, not one at a time. There is no la carte menu and we do not take special orders. As with Nicholson's attempt to order toast, you are asking for a very simple thing - a very reasonable and sensible thing, too - but the system is not currently built to help with that. And, to be clear, it's not only Wiki locks that suffer from this. We have many outstanding requests in a variety of places for a comment-only lock going back to at least 2013 and comments about how awesome such a lock would be in the Teachers' Lounge generally attract many stars. Locks were intended to prevent. .. essentially all behavior. Over time we realized that they could be useful to stop other things, too (comments, for example) but we were hard-coded into the specific behavior locks were built with and, rather than making more types of lock, we just created different explanations for the same lock in the form of the post notice - the current text of each appears in the screenshot above. The lock prevents:In addition to this, Historical significance locks remove voting arrows and lock all of the answers in addition to the question. For more info, see the relatively newly minted Lock Help Center article. So, you are asking for a chicken salad sandwich, minus the chicken salad, mayo, butter, and lettuce... but I am not going to kick you out of Stack Exchange for asking for it. I do not know when we will be able to rework the lock system or what it will look like but it's definitely something that needs to be fixed and something I hope will be sooner rather than later. hairboat hinted at this in her answer to this related request when she said:What we end up with will probably end up somewhere between what we have now and what that question is asking for but getting there is going to take a good deal of work since we would be starting from scratch and likely wanting to categorize existing locks appropriately. There's a long list of really awesome features we would like to revisit/revamp/create and this is one of them... so thanks for bringing this up!

Although GPR has been widely used in hydrology, engineering, environment and other fields, many basic theoretical and technical problems have not been fundamentally solved, so the real advantages of GPR have not been brought into full play.The main problems existing in GPR technology include:1) The detection depth is shallow, and the contradiction between detection depth and resolution cannot be overcome. Increasing detection depth means sacrificing detection resolution;2) Multiple spread and other clutter jamming are serious, and there has been no good elimination method, which exists in radars at home and abroad;3) The influence of medium unevenness is great and can not be eliminated, resulting in difficulty in obtaining necessary velocity data;4) The data collection method of single sending and single receiving can provide limited information for post-processing and interpretation.The above problems are fatal defects for GPR. Although many geophysicists, electromagnetic experts and geophysical workers have done a lot of research and improvement on radar antenna design, signal processing and underground target imaging, these works are only partial modifications to the existing GPR system. In order to develop GPR technology, we must update our ideas and solve the problems from the fundamental principle.In view of this situation, experts proposed to develop a new GPR system - phased array GPR detection system in 1999.The basic research idea is to replace the current monopole radar antenna with the phased array radar antenna by using the relatively mature military phased array radar technology. Its purpose is to gather the electromagnetic wave into a narrow beam to transmit underground (or detection object) through the phased array technology, and receive the radar echo signal reflected by the target by using the multi-channel acquisition technology, The advanced data processing is carried out, and finally the three-dimensional image of the internal structure of the detection object is given.Development prospect of ground penetrating radar technologyIt is worth noting that at present, similar products have appeared in the market, such as RIS antenna array series of a company, but these products simply combine multiple monopole antennas into array antennas, which is essentially different from the idea of phased array ground penetrating radar.Because the phased array radar converges the electromagnetic wave into a narrow beam by controlling the phase delay of each channel, the energy is concentrated and the wave front diffusion is small. Therefore, the detection depth of the phased array radar is much larger under the condition of the same frequency and transmission power; On the contrary, under the same detection depth, phased array radar can improve the transmission power, so its resolution is much higher than the existing radar. In addition, since the spherical wave transmission is changed to beam transmission, the influence of medium heterogeneity is much smaller.Secondly, the phased array radar works in a continuous scanning mode and can scan in multiple directions. Therefore, the amount of information is much larger than that of the existing ground penetrating radar. For some special detection work, such as the quality detection of embankment cut-off wall, its role is unmatched by the existing ground penetrating radar (monopole antenna radar can not detect the joints, forks and other defects of embankment cut-off wall at all).Because phased array radar is a multi-channel received signal, multi-channel superposition can be carried out, just like the multiple coverage technology of reflection seismic exploration. Therefore, multiple interference can be greatly eliminated, which is difficult for existing radars. The antenna of high frequency (600mhz-1ghz) phased array ground penetrating radar can be made smaller, and its advantages are unmatched by the existing ground penetrating radar in shallow detection.At present, the system prototype has been completed. The carrier free pulse working system with center frequency of 900MHz is adopted, and the transmitting and receiving antennas are separated. 16 (4 × 4) Transmit channel forming, beam aggregation and scanning 16 (4) × 4) The channel receives the echo, and the optional scanning angles are - 36 °, - 24 °, - 12 °, 0 °, 12 °, 24 ° and 36 °.The software part of the system has rich data processing functions. The main conventional processing includes filtering, gain adjustment, static and dynamic correction, deconvolution, complex signal analysis, time-frequency analysis, etc., and multi-channel data processing, such as velocity analysis, superposition technology, coherence analysis technology, array signal processing, etc. And weak signal extraction, target automatic recognition and inversion interpretation under various clutter interference. A large number of field experiments on concrete detection in Yichang Three Gorges dam are carried out. The experimental results show that the spotlight scanning function of phased array radar has been realized, the penetration depth is greater than 1.5m and the resolution is higher than that of ordinary radar.Editing: hfy

About 8 I think1. where can i get ncaa football 10 rosters with names?For the last two years I got mine from "Pastapadre". From what i can tell they are really pretty accurate. Give it a shot2. where can I watch NCAA football games for free?...?Try channelsurfing.net. They pick up a lot of justin.tv stuff, and they have loads of ncaa football games, free, no spam, etc. I watch all the time with no problems3. Can you download a team on NCAA Football 10's Team Builder using a flash drive?Why would you want to do that? Build your own team. Do not take the wussy way out.4. NCAA Football 13 Heisman Challenge 3 Player Pack?The exclusive Heisman Challenge 3-Player Pack including Mark Ingram, Tim Tebow and Matt Leinart. See if you can match the career accomplishments of these former Heisman trophy winners in the all new Heisman Challenge Mode. Its come with your ordered game copy5. What ncaa football team is your favorite one?Oklahoma SOONERS!6. I want to do a dynasty in NCAA Football 14 what team should I use (I want it to be a challenge like a weaker)?Vanderbilt, they are in a great conference and are already headed in the right direction as far as getting better and it will be a challenge because you will be in the SEC7. does ncaa football deserve a playoffs instead of bowl games being based off of BCS rankings?Whether or not the NCAA deserves a playoff does not matter. They do not want one so they do not have one. Frankly, the national championship playoff debate is a joke. This is something created by sportswriters and tolkshow hosts for the sole benefit of sportswriters and talkshow hosts. The NCAA does not recognize a national champion of the FBS so any discussion about who should or should not be the champion is pointless bloviating. Win your conference. Beat your rivals. Go to a bowl game. Those are the only things that matter in college football.8. What was determining the NCAA football title like in pre-BCS years?Hawaii, is not a very reliable team, yet might desire to win the Sugar Bowl in simple terms as surely as Georgia as a results of fact their offense constantly performs like its at the back of and it wears down the protection whilst they might desire to conceal the whole field. The unfold offense is the excellent offense in college soccer. It supplies much less gifted communities liek Hawaii and Illinois a gamble to beat far extra gifted communities. that's alsovery risky, that's why some exceptionally ranked communities dont run it. Hawaii surely did no longer deserve a identify shot in simple terms as a results of fact Boise State gained The Fiesta Bowl. Boise beat a BCS convention team who complete 10-4(Oregon State who beat USC and Hawaii in Hawaii) Hawaii has no high quality wins and does not deserve a NT shot. ending undefeated might desire to get you a BCS sport nevertheless9. NCAA Football 2009-What Defense to run online?Usually the defense package that comes with the team you are using as the best combo of players are on the field10. Which Championship/Playoff Picture needs more work....the NFL or NCAA Football?everybody keeps blaming the computers, but the computers are pretty much the only good part about the BCS, it only counts as 1/3 anyways. another 1/3 is coaches, former players, former athletic directors and people like that, the other third is the media. a lot of voters admitted to not even watching a utah game until they played alabama, how messed up is that. so lets put the blame where it really belongs, the stupid voters, who do not educate themselves about what or who they vote for11. could an NCAA football team beat a weak pro team?No-NCAA teams always have weak links and for the most part are BOYS.NFL teams have chosen the best of the best,and are MEN12. What teams rush the ball the most in ncaa football?its either navy or army one of them thats pretty much all they do13. What D1-AA teams are in NCAA Football 08?Usually they are. Just check out some of the SEC teams schedules. You find a lot of them there. Looks like the truth hurts down there!

The Haunting I vaguely remember some kind of eye injury in the movie.• Other Related Knowledge ofa cocktail glass— — — — — —POLL: Can you taste my NU5?you can sip mine from a straw ill get it into a cocktail glass for you.— — — — — —What food to serve in cocktail glasses?Take a tall shot glass and put a fresh/raw oyster in it along with a shot of ice cold Vodka (Absolut, Stoli) and add a dash of hot sauce, Worchesteshire and lemon wedge. Takes the slider to the next level.— — — — — —What are the best cocktail drinks to make and serve for the holidays?PEPPERMINT TWIST Peppermint Schnapps 1 oz. Kahlua 1 oz. Brown Crème de Cacao Directions: Fill a shaker half-full with ice cubes Pour all ingredients into shaker and shake well Strain drink into a cocktail glass and serve SCOTH HOLIDAY SOUR Ingredients: 1 ½ oz. Scotch 1 oz. cherry brandy ½ oz. sweet vermouth 1 oz. lemon juice 1 lemon slice Directions: In a shaker, shake all ingredients—except lemon slice—with ice Strain into an old-fashioned glass over ice cubes Add lemon slice HOLIDAY PUNCH Ingredients: 2-48 oz. cans pineapple juice 1-40 oz. bottle cranberry juice 2-750 milliliter bottles soda water 1 liter strawberry, raspberry or lime sherbet (Optional) 1 ½ oz. vodka Directions: Mix juices in a punch bowl Pour in soda water Top with scoops of sherbet If desired, add 1 ½ oz. vodka for an individual cocktail— — — — — —What are some good drink combinations?Tequilini (Original) Here is a good strong one that I like for starting the weekend, you should try it Ingredients: 2 1/2 oz Casa Noble Tequila Crystal Few Drops of Dry Vermouth Þ oz Fresh Lime Juice Mixing instructions: Shake ingredients in mixing glass with ice, then strain into a cocktail glass— — — — — —What's your favorite cocktail? How's it made?Try this, its great! Green Apple Tequini Ingredients: 2 oz. Casa Noble Crystal (Silver) 1 oz. Apple SchnappsSplash of Midori Squeeze of lime juice, fresh Mixing instructions: Shake ingredients in mixing glass with ice, then strain into a cocktail glass. Slice of Green Apple for garnish.— — — — — —If I only buy one style of cocktail glass for my new cocktail-making learning, which should it be? Which is the most versatile/useful?The most useful is a rocks or Old-Fashioned glass, for drinks with ice. However, if you also want drinks up with no ice, you may wish to also get coupes, which have replaced the traditional Martini glasses ud83cudf78— — — — — —info about bar and drinking please?In the UK i would say that you could get a pina colada in cocktail bars and some clubs, you would not get 1 in your local pub. I would imagine that someone who had never tried alcohol would get a warm fuzzy feeling from a pina colada but not be paraletic drunk. As for the glass id simply call it a cocktail glass.— — — — — —What would make the bottom of my cocktail glass develop a fractured pattern like this?Your instincts are right -- this is indeed crystallisation. Your original cocktail was a solution of lots of non-volatile components (sugar, Splenda, citric acid from the lemon juice, and many many other things...) in some rather more volatile solvents (ethanol and water). Only a limited amount of any of the non-volatile compounds can dissolve in a given volume of solution. So as the volatile compounds evaporated, your solution gradually became saturated, then a little super-saturated, and then finally the non-volatile components started to crystallise out in the patterns you show.In general slow evaporation of a solvent is quite a common method of crystal growth, e. g. , for X-ray diffraction studies.— — — — — —OK, its the last day of mankind, and you can have one mixed drink/cocktail, what would it be?Tequilini Ingredients: 2 1/2 oz Casa Noble Tequila Crystal Few Drops of Dry Vermouth 1/2 oz Fresh Lime Juice Mixing instructions: Shake ingredients in mixing glass with ice, then strain into a cocktail glass.— — — — — —how do you make a frozen bikini cocktail?well firstly buy a bikini freeze it and then add it to a cocktail glass and add required bverages which i dont know what they are— — — — — —Drink Recipe?'?????????There are a lot of them, any of these sound right? Ingredients: 1 1/4 oz Creme de Banane 1 1/4 oz Creme de Cacao Fill with Milk Mixing instructions: Fill Glass with ice. Add Creme de Banane to glass. Add Creme de Cacao to glass. Fill glass with milk. Ingredients: 1 oz Creme de Banane 1/2 oz Dark Creme de Cacao Fill with Cream Mixing instructions: Pour all ingredients over ice. Garnish with slice of banana. Ingredients: 1 oz Light rum 1 oz Creme de Banane 1 1/2 oz Cream 1 dash Grenadine 1 slice Banana Nutmeg Mixing instructions: Shake rum, creme de banana, cream, and grenadine with crushed ice and strain into a cocktail glass. Decorate with the banana slice, sprinkle nutmeg on top, and serve. Ingredients: 1 oz Malibu rum 1 oz Banana liqueur fill with Pineapple juice Mixing instructions: This drink can be mixed with ice added, or put into a blender with ice, to be crushed. Ingredients: 1 part Banana liqueur 1 part Creme de Cacao 1 part Vodka 1 part Half-and-half Mixing instructions: Mix in a shaker with ice then strain.