How Can I Paint a Wooden Door That Is Warped at the Bottom Due to Exposure to Heat and Rain? Pls Hel

You remove the door from frame, steam the warped section for while till it becomes soft (using a kettle for eg) , Clamp two straight planks on either side using G clamps let it dry naturally.You may be able to reuse it. but it necessitate the use of a a temporary door for a while

1. How do i remove sktickers from a wooden door?

They make a product called "Goo gone" just for this. If you can not get that, Orange glo, dish washing liquid and WD40 are also good at getting sticker goo off of things

2. I bleached my wooden door accidentally?

You did not say whether or not your door was stained before getting bleach on it. If it was painted, that's probably the best scenario for covering over the bleach spots. If the door/walls were stained, it will be much more difficult to match the hue and color of the original stain. the reason is that bleach will also lighten the natural fiber in the wood. Using the original stain will probably show up much lighten on the bleached areas. If you know the type of stain used, try to restain that color using a small artist brush to test a small area. If it's too light, you can try darkening by adding a "small" bit of brown or black paint, just enough to give it a darker hue. (The amount of bleach and depth of penetration into the wood fiber will affect the outcome of this process). If you are unable to match the stain, you could sand the door completely and then paint it. Again, depending upon how deeply the bleach penentrated the wood, you may be able to use another stain without winding up with bleach sploches. In the end, you should be able to match or repaint, just do not be too impatient as you try to match the color. good luck

4. My son punched our wooden door very hard last month. The wood has swollen and it won't close.?

Spray the door and the hinges with anti-inflammatory WD-40.You can get it at your local drug store. The swelling should go down in a couple of days

5. Fixing spots on a stained wooden door?

Sorry but the only thing to do now is sand and refinish the whole door.Even the part you've already done

6. A wooden door got kicked. How to repair the damage?

It looks like it's an inside door. You could patch it with drywall compound. tape, mud,dry,sand,mud,dry,sand,paint

7. What is the correct way of putting beam over wooden door of width 4 ft.It has 2ft window attached with it.?

Excellent answer, you just told him how to frame a header with little to no information. Better than I could (or would) do. Hey, guy that asked the question, just join a framing crew for a week or two, you will learn all about it. Maybe even make some money. BTW, that is one big door

8. Crack in a wooden door?

probably not good luck Dads going to be pissed

9. i need to put a window into a solid wooden door but I'm unsure how to do it...?

May be best to have a door manufacturer or custom woodworking shop do it.....you simply have to cut an opening in the door for the window exactly the same size as the glass allowing an extra 1/8 inch for up/down and side to side dimensions and cut trim pieces of wood to hold the glass in place. Stain or paint to match. The critical step is to make the cuts as accurate and straight as possible. A jig saw with a straight edge guide may work...lay out the dimensions precisely and check before cutting