My Computer Will Not Turn on, but the LED Light on the Power Supply Is On?

First, trouble-free issues: a million. attempt plugging it in to a diverse outlet. 2. next, determine the PSU is working and it truly is not the situation. in case you need to use a diverse PSU to objective and means the workstation. Use a multimeter if in any respect possible to determine the PSU is properly working. 3. determine the means connectors are linked wonderful, unplug any and all means cables and re-connect them, making valuable they are all interior the wonderful places and secured tightly. 4. determine the means headers are inserted (The small cable top from the means button on your case to the pin financial business enterprise someplace on the motherboard. ) it is what sends the sign once you hit the means button on the case and easily activates the workstation. 5. determine the motherboard is not malfunctioning. make valuable the PSU is working first, no remember if it truly is then it could desire to probable be the motherboard. 6. be certain not something is broken (RAM, CPU, HDD). 7. Did you misdiagnose the situation? Is it a fault with your exhibit screen according to threat, or your portraits card?? From what you informed us it could desire to be a great style of issues, there is not plenty to flow on. How precisely did you are casting off the dirt? i am hoping you probably did not attempt to apply a vacuum or a feather duster, because of the fact those could reason electro-static injury.

1. how could i hook up a LED light bulb (small) into a remote control car?

dude go away with all the same questions.. how about you tape it

2. How do I make a LED light pulse?

You only have two choices here, Either pulse it on and off quickly which will make it APPEAR to be brighter or dimmer.(due to the way our eyes work) Or you can lower the current going to it with a voltage regulator of some sort which will give you some control over its brightness.

3. How to mount LED light strips

1. How do I use my LED Strip Adhesive? Before you go peeling the adhesive off and just slapping your LED light strips up, there's a little prep work you may need to do. First thing's first, make sure that the surface you plan on mounting your strip to is smooth and relatively level, while our strips can certainly turn corners, to sharp of a turn can potentially damage strips in the long run. Next, check the mounting site to make sure it is dry and free clear of potential irritants like dirt or other particulate matter. Once your mounting site is ready, go ahead and peel back the adhesive backing to expose the glue, then attach the strip directly to your chosen site. This adhesive should be more than enough for most indoor projects and even many outdoor projects, as long as the surface site is dry, smooth, and clean. 2. How long will the lights stay mounted? Assuming that you've mounted the LED light strip indoors and that the mounting site met all of the criteria laid out in the last answer, they should last as long as the lights themselves (maybe even longer!) However, if the area where the lights have been mounted is humid, or the strips are physically bumped or jostled, then the strip may droop in affected spots after some time. No need to worry though! Those saggy areas can remounted with glue or one of our accessory products like mounting tape or mounting clips. Before remounting though, check the area the strip has begun to droop off of, there's a chance an irritant or moisture was behind the strip losing its grip! Once you've re-secured the strip to the mounting site, your strip should be right back to normal and good as new! LED Strips Mounted Outdoors - Will the standard adhesive hold up outside? I really wish I could give you a straight yes or no answer on this, but unfortunately it's a pretty variable answer depending on the circumstances. Just with mounting indoors, first make sure your mounting site is smooth, dry and clean. If you will be mounting in a more humid environment, then the adhesive probably wo not last as long as it would indoors. However, if mounted in a pretty dry, temperate climate then your adhesive should work just fine. Although, if you would rather not take the chance of the strip's adhesive failing, then there are a lot of other options you can go with. We offer a strong foam mounting tape that can easily handle outdoor environments, and mounting clips are resistant to even more. However, if you want a mounting solution that can stand up to anything that is not a pair of scissors, then zip-ties are your best friend, if your mounting site will allow for them. 4. What do I use for waterproof strips with no included adhesive? Well I hate to be the bearer of bad news, but if you plan on mounting these waterproof LED light strips completely underwater, then glue or other adhesives just wont work. So for waterproof strips, the mounting solution is really up to what you want it to be. Zip-ties are always a great go to if your project allows for them, but sometimes you may not have something that a zip-tie can wrap around. In cases like this, you may need to get a little heavy duty and turn to more industrial mounting applications, like metal wire clips or large staples over the strip (not through them obviously!) If you do not want to take a trip to the hardware store then sometimes a nail carefully bent over the strip can work just fine .